Methods to reduce wear of conveyor belt in use

In the process of conveyor operation, the daily work load of the conveyor belt is very large. In the process of work, the belt will be worn. This situation is inevitable, but we can try our best to reduce the occurrence of this situation. The following will introduce the methods to reduce the wear of the conveyor belt in the process of use:
1. The feeding direction should be along the running direction of the belt to minimize the impact and wear of materials on the belt;
2. The feeding port should be away from the top of the roller or idler;
3. Reduce the drop of materials on the belt as much as possible;
4. The distance between rollers and buffer measures should be taken in the belt receiving section. In order to prevent the belt from being scratched, it is not suitable to use the cloth layer belt head for the contact part between the material retaining device, scraper cleaning device and discharge device and the belt, but the rubber plate with appropriate hardness should be selected;
5. Regular inspection of roller, found that can not run in a timely manner to replace, and check roller, timely clean up the attachment above.